Terjemahan Kitab Minhajul Muslim.pdf

In order to select the route, you will need to select an appropriate nozzle from the list. A nozzle will be selected if the length of the pipe is longer than the nozzle. If the length of the pipe is short, the nozzle will disappear if is selected. The selected nozzle will be added to the route automatically and the coordinates of the nozzle center and place it into the dialog box for further modification.

The center and length of the pipe, as well as the selected nozzle, will be displayed into the dialog box From and To. The center of the nozzle can be modified by clicking on it, in the dialog-box span x and y axes. The length of the pipe can be selected with the scroll bar or by clicking in the coordinates in the dialog-box and then will be automatically modified into the pipe to the function LENGTH. If the nozzle is about to be changed, the center of will be modified as well

Enter the second reference point where will be built the pipe. You will need to select an appropriate nozzle from the list and the same as before, the paths will be displayed into the dialog-box From and To. All the different options will be automatically modified into the pipe. If the length of the pipe is about to be changed, the coordinate will be automatically modified as well.

In this way, you can modify the pipe line and the path through several nozzles. In the pipe line, it is possible to join the different components that are available and make them together more complex structures. d2c66b5586